| The radio leads are the key elements especially in the | | | | steering wheel and also support the remote control |
| steering wheels where one can enable the controls | | | | interface. |
| easily with the help of radio leads. Though the products | | | | At first see that the wires shouldn't be connected |
| may be different the connecting features remains | | | | with each other. |
| almost the same. | | | | Join the interface to the series lead and plug in the |
| Alpine radio leads: - | | | | main loom into the header unit and vehicle |
| The alpine leads are useful in recognizing the controls | | | | On the radio by ignition and again switch of by |
| on the steering wheels. When you are using a PC99 X | | | | ignition |
| make sure that it requires PC99-ALP as an interface | | | | Again plug in the jack and turn on the radio and |
| with the header unit. When you are installing this alpine | | | | test it with the help of remote control. |
| radio follow these rules carefully | | | | Kenwood radio leads: - |
| See that that the twin orange wires of the link are | | | | The Kenwood radio leads consists of a four pin |
| coupled with each other | | | | socket in order to make the head unit compatible with |
| Couple the alpine interface PC99-ALP with the | | | | the steering remote |
| PC99 | | | | At first couple the interface to the series lead |
| Later switch on the vehicle and header unit | | | | The main loom should be plugged in with the head |
| After that switch on the radio and select a desired | | | | unit and vehicle |
| frequency | | | | Switch on the radio and select a radio frequency |
| Next switch off the radio and eject the key and | | | | Later Switch of the radio by means of ignition |
| later plug in the jack | | | | Connect the four pin plug to Din socket |
| The last step is test the radio leads with the help | | | | At last switch on again by means of ignition and |
| of a remote | | | | test it with the remote control |
| Pioneer radio leads: - | | | | Sony radio leads: - |
| When you are using the pioneer radio leads follow | | | | Sony radio leads features mainly a joystick port and a |
| these points | | | | stereo head phone to install into the socket. The |
| At first join the pioneer interface to PC99 | | | | installing of the Sony radio leads can be done by |
| Next switch on the main loom into the header unit | | | | Couple the Sony interface along with series lead |
| and vehicle | | | | Later the main loom must be plugged in with |
| Later switch on the radio by ignition and select a | | | | vehicle and header unit |
| certain radio station | | | | On the radio by means of ignition and select a |
| Switch off the radio and plug in the jack | | | | radio station |
| Again switch on the radio by means of ignition and | | | | Switch of the stereo and the jack must be |
| check the audio before making use of the remote | | | | plugged in |
| control | | | | Finally again switch on the ignition by means of |
| JVC radio leads: - | | | | ignition and wait for another 20 minutes and test it with |
| The JVC radio leads connect the controls to the | | | | the help of remote control. |